Snoli 8mm Gauge Drill Bit For Skis And Snowboards

Snoli 8mm Gauge Drill Bit For Skis And Snowboards

Snoli 8mm Gauge Drill Bit is a special drill which is used when fitting brass inserts when the binding mounting screw thread has been stripped in the ski or snowboard. The bit is designed to be used with a standard drill and without a jig. The drilling depth can be pre-set using the locking collar to avoid drilling too deep and to help prevent drilling through the ski or board base.

Please Note

You must follow the manufacturers guidelines exactly before drilling into the top surface of a ski. Drill diameters and depths are usually visible on the top of the ski in the binding area. If you have any doubts at all please don’t hesitate to contact us for free advice.

Weight
0.110 kg

Brand

Snoli